TDS ZINGACERAM HS

Zingaceram HS is a high solid 2 pack intermediate coat to be applied as a sealer over ZINGA. Due to its high solid (HS) content it shows good compatibility on ZINGA. Zingaceram HS has very good abrasion resistance and excellent corrosion protection properties.

TDS Zingaceram HS EN DOWNLOAD

ZINGACERAM HS

REFERENCES, CERTIFICATION AND TESTS

ISO 12944 ON ZINGA + ZINGACERAM  

Project Description

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems
The ISO 12944 standard is intended to assist engineers and corrosion experts in adopting best practice in corrosion protection of structural steel with coatings at new construction and repairs. ISO 12944 is progressively superseding regional standards to become a truly global benchmark in corrosion control.

The ZINGA/Zingaceram HS/Zingaceram EP system has been subjected to extensive testing such as water condensation
test, neutral salt spray test, chemical resistance test and water immersion test. After a prescribed exposure test (depending on representative environment), the coating is assessed for adhesion, blistering, rusting, cracking and flaking.

Environments are classified according corrosivity:

C1: Indoor conditions (Heated buildings/neutral atmosphere)
C2: Rural areas, low pollution (countryside, inland town areas)
C3: Urban and industrial atmospheres with moderate sulphur dioxide levels and salinity. Production areas with high humidity (inland big cities with high traffic)
C4: Industrial or coastal (with moderate salinity) zones (chemical factories, swimming pools, shipyards)
C5I: Industrial zones with high humidity and aggressive environment (continuous condensation and high pollution)
C5M: Coastal zones and marine zones with high salinity (continuous condensation and high pollution)

After exposure, the coating is evaluated as H(igh), M(edium) or L(ow); reflecting in a life expectancy of:
Low: Life expectancy less than 5 years
Medium: Life expectancy between 5 and 15 years
High: Life expectancy more than 15 years

The system

ZINGA 1 x 60-80 µm DFT

+

Zingaceram HS 1 x 120 µm DFT

+

Zingaceram EP 1 x 60 µm DFT

passed the tests for C5I and C5M with a High Classification.

Project Details

Categories:Certificates and reports
ZINGA
Zingaceram EP
Zingaceram HS

ISO12944-Zingaceram-EP-e1439475053644
stripe

Contact Us

    Igoe International Ltd – ZINGA Distributors

    135 Slaney Road,
    Dublin Industrial Estate
    Glasnevin
    Dublin D11 AW6D
    Ireland

    Website www.zinga.ie

    See also www.igoe.ie

    01 830 22 50 / 830 22 49

    info@igoe.ie